OUR EQUIPMENT
Technology for
complex parts.
A technology portfolio built around precision machining and dimensional inspection.
5-AXIS MILLING
DMG MORI DMX 60 U
A 5-axis CNC machining centre for complex components, contoured surfaces and operations requiring precision and repeatability.
- Simultaneous 5-axis machining
- Spindle speed: 15,000 rpm
- Optional grinding capability for dedicated finishing operations
- Axis travels X / Y / Z: 600 / 600 / 510 mm
- Maximum part diameter: 630 mm
- Maximum part height: 450 mm
- Maximum part weight: 300 kg
- HEIDENHAIN TNC7 CNC control
CNC MULTITASKING TURNING
DMG MORI NLX 2000|500 SY
A CNC turning centre with Y-axis, driven tools and sub-spindle for efficient machining of complex components and fewer re-clamping operations.
- SY configuration: main spindle and sub-spindle
- Y-axis for off-centre machining and milling
- Maximum machining diameter: 366 mm
- Maximum machining length: approximately 500 mm (510 mm according to the series technical data sheet)
- Maximum bar capacity: 65 mm
- Axis travels X / Y / Z: 260 / 100 / 590 mm
- Driven tools: up to 10,000 rpm, depending on configuration
MULTITASKING TURNING
Nakamura-Tome WT-150II
A multitasking CNC lathe for components requiring turning and complex machining in an efficient process.
- Two main spindles and two turrets for multitasking
- Maximum turning diameter: 190 mm
- Maximum turning length: 515 mm
- Bar capacity: 51 mm, optional 65 mm on the left spindle
- Left spindle speed: up to 5,000 rpm; right spindle: up to 4,500 rpm
- Spindle motor power: 15/11 kW (left) and 11/7.5 kW (right)
- Up to 48 tool positions, depending on configuration
- Optional gear hobbing
- Optional broaching
GEAR GRINDING
REISHAUER RZ 362 A
A gear grinding machine for precision finishing of gears, helping achieve accurate profiles and smooth gear operation.
- Accuracy class: up to class 6
- Maximum module: 6
- Maximum gear diameter: 350 mm
SURFACE AND GUIDEWAY GRINDING
WALDRICH COBURG
An industrial surface and guideway grinding machine with a robust, stable construction, designed for large surfaces where flatness, geometry and precision are essential.
- Maximum grinding length: 3,000 mm
- Surface and guideway grinding
- Robust construction for stability and precision
5-AXIS CNC MILLING
HAAS UMC-500SS
A Super Speed vertical CNC machining centre with a dual-axis rotary table, designed to machine complex parts in fewer setups and with fast cycle times.
- Simultaneous 5-axis machining
- Axis travels X / Y / Z: 610 / 406 / 406 mm
- Standard spindle speed: 12.000 rpm
- Taper: 40
- Tool magazine: 30+1 positions
- Rotary table diameter: 400 mm
- Rapid traverse rate: up to 30.5 m/min
- Wireless probing system for part setup and inspection
3D METROLOGY
ZEISS Contura 7.7.6
A coordinate measuring machine for inspecting dimensional and geometric characteristics of machined components.
- Measuring range (X / Y / Z): 700 / 700 / 600 mm
- Coordinate measuring machine (CMM) for 3D dimensional and geometric inspection
- ZEISS VAST GOLD XT active scanning sensor
- High-precision active scanning for continuous capture of measurement points
- Inspection of component dimensions, forms and geometric positions
- Support for dimensional reports and quality control